Cutbooster PA-3
Cutbooster PA-3
Fully automatic cutting
Cutbooster PA-3 is a fully automatic section cutting line that does the work for you. The PA-3 has a magazine that feeds the material to be cut, an automatic saw that cuts sections into a preset number of pieces, and a receiving station where the cut pieces are stored.
Feeding and receiving magazine
Before cutting, profiles or all packets are kept in the feeding magazine. The magazine can contain up to 15 packets, which are sequentially fed to be cut in accordance with the schedule. The cut pieces are kept in the receiving magazine.
Full control in the panel and reduction of waste to a minimum
The entire cutting process can be controlled using the touch panel. You have access to the cutting list, the order import system, and the waste reduction system. Thanks to the CutLogic software, you can make the maximum use of the materials and reduce waste to as little as 0.5%!
Data transfer
The Draco Connect system makes it possible to send orders from the ERP system or from a prepared file directly to the machine via a Wi-Fi network or a USB port. You do not need to remember the number of cuts, the required length and the change of material: the system receives the order and coordinates its implementation.
Check Cutbooster PA-3 in action
Clicking will load a video from YouTube (Google), which may set cookies.
Improved work organisation
Code reader
Label printer
The work on the cutting stand can be enhanced even further by using a code reader and a label printer. A code reader allows you to instantly scan a given dimension from a list, while with a label printer each element that has been cut can be instantly labeled and described.
Why Cutbooster PA-3?
- Automatic feeding and cutting into a preset number of pieces
- Automatic loading from the magazine and storage of cut pieces
- Automatic saw with a pneumatic clamp
- Table with a top (standard) or with rollers (option)
- Machine size tailored to customer needs
- Correction system
- Label printer and barcode reader (option)
- Connection to ERP systems (option)
- Servo motor – positioning accuracy of +/- 0.3 mm over 3 m
- Backlash-free ball guide (HIWIN)
- CutLogic – cutting optimization
Technical data
| Parameter | Value |
|---|---|
| Taking of material | Automatic, from the feeding magazine |
| Setting the dimensions | Automatic |
| Feeding of cut elements | Automatic |
| Collection of material | Automatic, to the collecting magazine |
| Cutting device | An automatic saw, 400 mm, with a pneumatic clamp |
| Cutting of materials | Aluminum |
| Entering the dimensions | Manual using a touch panel |
| Guide | 4-row, ball, playless, lubricated after a distance of 1,000 km |
| Fender stroke | 600 cm |
| Feeding table | A 600×60 cm table with a top |
| Receiving table | A 300×60 cm table with a top |
| Feeding magazine | Possibility to load 15 packets |
| Receiving magazine | Storage of elements after cutting |
| Material feeding speed | 0.4 m/s |
| Precision | +/- 0.3 mm |
| Corrections of dimensions | Possibility to enter constant dimension corrections for many systems |
| Cutting history | Saving completed cuts in a memory |
| Drive | A servomotor to “maintain the dimension” |
| Safety switches | Manual |
| Safety block | No possibility to operate the saw with the guard opened |
| Control panel | A 7″ touch panel |
| Diagnostics | Self-diagnostics on the touch panel |
| A cutting list | A list containing the following columns: dimension and quantity |